How to Clean Up the Oxygen Supply Equipment in the Maintenance Center?
2021-10-28
In recent years, the domestic economic level has continued to grow rapidly, the national level has continued to improve, and the medical and health services have also developed rapidly. Hospital expansion and new projects have blossomed, and high-standard modern medical equipment has also been improved. The central oxygen supply system can maintain cleanliness and hygiene, so how to clean and maintain the central oxygen supply equipment? Routine cleaning and dust removal of sanitary surfaces every day, using wet cleaning, detergent can be used if necessary. Every day, unless there is obvious blood and body fluid contamination, there is no need for routine disinfection of sanitary surfaces. However, after the patient is discharged from the hospital, whether he has an infectious disease or not, he should be disinfected. According to the classification of sanitary surfaces, the cleaning frequency can be adjusted according to the degree of contact. For example, high-frequency contact with sanitary surfaces requires cleaning once every 2-4 hours. The pool for cleaning mops and rags cannot be shared. When it is necessary to clean the mop with buckets of water, the index of bucket replacement of clean water is not based on the turbidity of the water, but based on the items to be cleaned. Wipes and mops in different areas should be specially used in the area and can be marked with colors; after use, the cleaning agent should be cleaned, disinfected, hung and dried for later use. The maintenance of central oxygen supply equipment is generally carried out by the system manufacturer. Common maintenance problems include plugging and unplugging failures of the gas source terminal, valve leakage, gas source terminal leakage, pipeline leakage, compressor failure, oxygen generator failure, etc. Therefore, it is necessary to choose a manufacturer with good after-sales service and good quality. The pressure gauge and safety valve of the system should be checked once a year, and a set of spare equipment should be prepared. Perform an air tightness inspection once a year, especially the threaded connections and welds of the pipeline. When the system leaks or the pressure regulator, pressure gauge, explosion-proof device is damaged or abnormal, it should be repaired or replaced immediately.
