An oxygen generator is a type of machine that produces oxygen. Its principle is to use air separation technology. First, the air is compressed with high density and then the difference in the condensation point of each component in the air is used to separate it from gas and liquid at a certain temperature, and then it is separated into oxygen and nitrogen by rectification. Under normal circumstances, because it is mostly used to produce oxygen, people are used to calling it an oxygen concentrator. Because oxygen and nitrogen are widely used, oxygen generators are also widely used in the national economy. Especially used in metallurgy, chemical, petroleum, national defense and other industries.
Operation method 1. Install the main engine in rotation on the floor or hang it on the wall with a pylon, and install a gas filter; 2. Nail the oxygen supply gusset on the wall or support as required, and then hang the oxygen supply; 3. Connect the oxygen supply port with the oxygen supply tube, and connect the 12V power line of the oxygen supply to the 12V power line of the host. If multiple oxygen supplies are connected in series, you only need to add a three-way joint and fix the pipeline with a wire buckle; 4. Plug the 220V power cord of the host into the wall socket, and the red light of the oxygen supply will be on; 5. Please add pure water to the designated position in the humidifying cup. Then install it on the oxygen outlet of the oxygen supply; 6. Put the oxygen delivery tube on the oxygen outlet of the humidification cup; 7. Press the oxygen supply start button, the green indicator light will be on, and the oxygen generator will start to work; 8. According to the doctor's advice, adjust the flow to the desired position; 9. Hook up the nasal cannula or wear the mask to inhale oxygen according to the packaging instructions of the oxygen mask or nasal suction tube.
The above is about the operation method of the oxygen generator. Our company has a large number of oxygen generators. If you are interested, you can come and have a look. Not only that, in order to reflect the diversification of our business, we also have SMT Cleaning Machine, PCB Cleaning Machine, PCB Separator, Reflow / Wave Soldering Machine, SMT Nozzle / Feeder.
