The oxygen generator is a device that uses air as raw material to produce oxygen. The oxygen concentration can reach 95%, which can replace bottled oxygen. The principle of the industrial oxygen generator is to use air separation technology. Firstly, the air is compressed with high density and then the difference in the condensation point of each component in the air is used to separate the gas and liquid at a certain temperature, and then it is obtained by further rectification. Industrial oxygen is generally obtained through this physical method. Large-scale air separation equipment is generally designed to allow oxygen, nitrogen and other gases to fully replace the temperature during the process of climbing and descending to be rectified.
Principle of PSA Oxygen Generator There is 21% oxygen in the air. The principle of PSA separation and production of oxygen is to physically extract oxygen from the air to form a high concentration of oxygen. The separation of oxygen by PSA is a physical method, so the oxygen produced will not be mixed with other harmful substances. The quality of oxygen depends on the quality of air and is better than that of air. The main parameters of the oxygen generator are: power consumption and oxygen production. The oxygen production is usually reflected by the output oxygen flow and concentration. In addition, the important parameters of the oxygen generator include: the pressure of the oxygen generator and the pressure of the oxygen output port. The core of the oxygen generator is a molecular sieve air separation oxygen generator with patented technology. An oxygen generator of different sizes is equipped with a corresponding air compressor to form an oxygen generator unit.
The above is about the difference between ventilators and oxygen concentrators. Our company has a large number of oxygen concentrators. If you are interested, you can come and have a look. Not only that, in order to reflect the diversification of our business, we also have SMT Cleaning machine, PCB Cleaning Machine, PCB Separator, Reflow / Wave Soldering Machine, SMT Nozzle / Feeder.
