Page-3 news - Shenzhen KunPeng Precision Intelligent Technology Co., Ltd

Mr. Eden

What can I do for you?
8618575511218

 HomeCompany News

2021-10-30

How Often does the Industrial Oxygen Generator Need to Replace the Water?

The industrial oxygen generator adopts high-tech bipolar oxygen generation technology. The oxygen generation module in the instrument automatically selects oxygen molecules in the air and ionizes them into negative oxygen ions under normal pressure, and the negative oxygen ions are sucked in by the gravity of the positive electrode. Module. After the negative oxygen ions reach the positive electrode, they release electrons and are reduced to oxygen, the purity of which can reach about 99%, and the oxygen concentration and gas output are adjusted by mixing air with the air pump to obtain a high concentration of oxygen of about 30%-99%. Water in industrial oxygen generator: The water in the humidification cup of the industrial oxygen generator is used to humidify the oxygen, so that the oxygen will not appear too dry when it is sucked up. Generally, the water in the humidification bottle of the industrial oxygen generator must be poured out every time it is used up . Industrial oxygen generators also have some other attention issues: (1) If the industrial oxygen generator adopts first and second filter cotton, it must be cleaned once every half a month and air-dried naturally. (2) The casing of the industrial oxygen generator should be scrubbed regularly. (3) Do not place any debris at the bottom of the fuselage of the industrial oxygen generator, and keep the room ventilated.
2021-10-28

How does the Central Oxygen Supply Equipment Ensure Safe Operation?

1. Strictly control the prohibition of fireworks and firecrackers near the central oxygen supply system station. Smoking is strictly prohibited in the station, and no part of the central oxygen supply system is allowed to come into contact with grease. The use of electric heating devices is prohibited. It is forbidden to enter or mix flammable, explosive and other dangerous materials, do a good job of fire prevention and explosion safety, and provide fire extinguishing equipment. 2. The management and transportation personnel of the central oxygen supply system must receive special training. The processing gas cylinders should be loaded gently to prevent shocks. The valves and pipes of the central oxygen supply equipment must be inspected, no leakage is allowed, and non-workers are not allowed to use them. 3. The central oxygen supply system and oxygen pipeline facilities must be maintained and managed by personnel. If there is any damage, malfunction or leakage, etc., it should be checked and repaired in time. A daily fire control inspection system should be implemented, and inspection records should be kept. If there are unsafe factors, effective measures must be taken immediately to eliminate hidden dangers and ensure normal medical oxygen supply. When repairing the oxygen pipeline, the valve must be closed and the oxygen in the pipeline must be exhausted for welding. 4. The central oxygen supply system and oxygen pipeline used in each ward shall be responsible for itself. The valve should be closed in time and smoking is strictly prohibited. 5. If the non-medical department uses the central oxygen supply system, it can be used after being verified by the medical department and reported to the department director for approval, and the relevant regulations and operating procedures of the hospital shall be strictly implemented. 6. The staff of the central oxygen station are not allowed to drink alcohol. 7. The central oxyge
2021-10-12

High-purity Nitrogen Generator for Pharmaceutical Packaging and Processing

Nitrogen generators can be used in many processing links in the pharmaceutical industry. In the pharmaceutical process, in order to avoid oxidation, it is necessary to reduce the presence of oxygen. At this time, a nitrogen generator is needed. When nitrogen is used to seal or inert the environment, the material properties can be kept stable, otherwise the contact with oxygen will cause the properties to change and even cause toxicity. Nitrogen is a dry inert gas. When oxygen accelerates oxidation or affects product quality, nitrogen is a very good alternative to oxygen. Transfer High-pressure nitrogen is also used to help the safe transfer of substances from one container to another. This efficient method can effectively speed up the transfer process without damaging the original material. Purge Production and analysis instruments can be purged with nitrogen to remove oxygen or moisture in the production process, improve product quality and reduce the possibility of further processing Nitrogen seal Chemically active pharmaceutical ingredients and drugs must be stored reasonably to ensure that moisture and oxygen will not affect the quality of the product and the powder will not agglomerate. Sealing with nitrogen can provide an inert environment and inhibit air pollution, such as the growth of moisture and bacteria. Nitrogen can fundamentally prevent substances that can react with oxygen from contacting oxygen and ensure product quality. Because it is safe, convenient, and reliable, and does not require a large amount of storage, nitrogen generators are increasingly used in pharmaceutical equipment laboratories or hospitals, replacing high-pressure gas cylinders.
2021-10-12

Ultra-high Purity Nitrogen Generator

Over the years, nitrogen has been widely used in all aspects of the heat treatment industry, such as acting as a protective gas, purge gas, and inert gas processing. Nitrogen is often used in the processing of metal primary products (such as steel billets, steel ingots and steel bars) and in the processing of metal products (metal parts processing). ROC ultra-high-purity nitrogen generator allows you to produce high-purity nitrogen at a very low price in the industrial field. For the composition of the atmosphere in the high-temperature furnace, function and control play a vital role in metal strengthening and thermochemical operations. The nitriding process is usually carried out in a convection furnace, which is either a deep pit type or a box type. Before filling the furnace with ammonia gas, purge the furnace with nitrogen to exhaust the air in the furnace. The main purpose of purging the furnace body is to prevent ammonia and oxygen in the air from reacting at high temperatures. When the ratio of ammonia to oxygen reaches a certain range, an explosive gas atmosphere will be formed. The temperature rise of the nitriding furnace is also carried out under a nitrogen atmosphere. When the nitriding process is over, the inside of the nitriding furnace needs to be purged with nitrogen to ensure safety. At the same time, the cooling process also needs the assistance of nitrogen to prevent the metal surface from being oxidized. The carbonitriding process is very similar to the nitriding process. The difference is that carbon dioxide is also added to the gas treatment process. At the same time, the cooling process is faster in comparison. The ultra-high-purity nitrogen generator can provide ultra-high-purity nitrogen with an oxygen concentration of less than 5ppm on site to meet the application requirements of the nitriding furnace. The ultra-high-purity nitrogen generator produces nitrogen on site, which is convenient and fast, an
2021-09-14

The Advantages of Oxygen Generator

For oxygen machine, I believe we all have an understanding, do you understand oxygen machine? Oxygen machine produced by the oxygen is our life, essential, is our human beings can not leave, then you understand the oxygen machine? Of course, oxygen making machine is not only medical oxygen making machine, but also industrial oxygen making machine. The following is to introduce the advantages of our industrial oxygen making machine: 1. Easy installation: Wanbo air separation oxygen machine equipment compact structure, overall ski-mounted, small footprint, no capital investment, less investment. 2. High quality zeolite molecular sieve: large adsorption capacity, strong pressure resistance, long service life. 3. Fault safety system: Wanbo air separation oxygen generator can configure alarm and automatic start function of fault system for users to ensure the safe operation of the system 4. It is more economical than other oxygen supply methods: psa is a simple method of oxygen production. It uses air as raw material and consumes only the electricity consumed by the air comp
2021-09-09

About Oxygenerator

Today to give friends a simple detailed introduction of the key effect of oxygen machine. Reactive oxygen species decomposed glucose oxidase from the internal air of bacteria; Immediately with bacteria, virus infection produce effect, destroy its plant cell DNA and RNA, dissolve protein, lipids and sugar content of biological macromolecular polymers, so that the bacteria chemical metabolism growth and breeding process is destroyed. Seeping into the cytoplasm, the invasion of the cytoplasm effect within the outer membrane protein and lipopolysaccharide, make the cell produces permeability change, causing somatic cell fusion, but also killed bacteria in the body of the genetic, parasitic parasitic bacteria, virus particles, phage, branches of the original body and pyrogen (such as bacteria, endotoxin virus metabolism substance) melt sexual subjugation. Ozone sterilization belongs to lysozyme, is one of the most complete way of sterilization. Even though reactive oxygen species can kill viruses and germs, can they also kill healthy facial cells? No, because healthy cells have a powerful equilibrium enzyme system, reactive oxygen species do not harm healthy cells. Newly decorated house furniture, office buildings, hotels and so on are found in the room harmful gas evaporation is more serious, such as indoor formaldehyde, benzene, toluene, and other harmful substances exist, there are some concentration values beyond the quality standard. The staff member also can be caused by the harmful gas after the interior decoration interior decoration causes the body to be uncomfo
2021-06-09

Application of Nitrogen Generators in Various Industries

1. Metallurgy and metal processing industries Used for annealing shielding gas, sintering shielding gas, nitriding treatment, furnace cleaning and purging gas, etc. It is widely used in metal heat treatment, powder metallurgy, magnetic materials, copper processing, metal wire mesh, galvanized wire, semiconductor, powder reduction and other fields. Some of these industries require nitrogen with a purity greater than 99.5%, while others require high-quality nitrogen with a purity greater than 99.9995% and a dew point below -65°C. 2. Chemical and new materials industries Mainly used for chemical raw material gas, pipeline purge, atmosphere replacement, protective atmosphere, product transportation, etc. Mainly used in chemical, spandex, rubber, plastics, tires, polyurethane, biotechnology, intermediates and other industries. Many chemical industries do not require high nitrogen purity, and many of them can be used with a purity greater than 98%. 3. Food and pharmaceutical industries Mainly used in food packaging, food preservation, medicine packaging, medicine replacement gas, medicine conveying atmosphere. Generally, the produced nitrogen gas must be treated with sterilization, dust removal, and water removal to meet the special requirements of the industry. The food industry does not have high requirements for nitrogen, many of which can meet the requirements with a purity of 98% or more. The pharmaceutical industry usually requires nitrogen with a purity of 99.9%. When the amount of nitrogen used in the food industry is small, membrane separation is often used to produce nitrogen, and when the amount of nitrogen is large, pressure swing adsorption is often used to produce nitrogen. 4. Electronics industry Used for packaging, sintering, annealing, reduction, storage, etc. of electronic products. Mainly used in wave soldering, reflow soldering, crystal, pie
2021-06-09

Composition and Daily Maintenance of Nitrogen Generator

The main configuration of the nitrogen production system is as follows: 1. Air compressor The nitrogen-making device uses an independent air compressor as much as possible, and can also use its own air compressor station to provide compressed air, but it is necessary to ensure that the nitrogen-making system is supplied with sufficient air volume and relatively constant input pressure. If there are many points of use of the air source, the intake pressure of the system must be controlled to ensure normal and stable operation. Ensuring a stable intake pressure is a prerequisite for the normal operation of the nitrogen generation system. Note: The compressor must be equipped with a hot air duct to direct the heat dissipation and hot air to the outside, so as to avoid the equipment operation failure caused by the excessive temperature of the machine room! 2. Air buffer tank The main function is to act as a buffer for compressed air to stabilize and store. In addition, it can also collect and remove most of the oil-water condensate that enters the compressed air source. Danger: When removing the relevant accessories of the storage tank, the pressure must be relieved before disassembly. (Such as safety valve, pressure gauge) Note: It is necessary to regularly check whether the blowdown valve of the air tank can discharge normally, so as to prevent excessive sewage from accumulating in the tank and affecting the subsequent purification system. 3. Freeze dryer The refrigerated dryer is based on the principle of freezing and dehumidification to compress air in the freezer to exchange heat with the refrigerant. The moisture in the air is cooled and then condensed again, thereby condensing a large amount of water vapor and oil mist contained in it into liquid droplets. Drain by automatic drain. After this treatment, the dryness of the compressed air can reach -23℃ (pressure dew p
2021-05-22

The Main Purpose of the Nitrogen Generator

The main purpose of the nitrogen generator 1. The special nitrogen generator for the petroleum and natural gas industry is suitable for the fields of nitrogen protection, transportation, coverage, replacement, emergency rescue, maintenance, nitrogen injection and oil extraction in mainland oil and natural gas exploitation, coastal and deep-sea oil and natural gas exploitation. It has the characteristics of high safety, strong adaptability and continuous production. 2. The special nitrogen generator for the chemical industry is suitable for petrochemical, coal chemical, salt chemical, natural gas chemical, fine chemical, new materials and other chemical product processing industries. Nitrogen is mainly used for covering, purging, replacement, cleaning, pressure conveying, chemical reaction stirring, chemical fiber production protection, nitrogen filling protection and other fields. 3. The special nitrogen generator for metallurgical industry is suitable for heat treatment, bright annealing, protective heating, powder metallurgy, copper and aluminum processing, magnetic material sintering, precious metal processing, bearing production and other fields. It has the characteristics of high purity, continuous production, and some processes require nitrogen to contain a certain amount of hydrogen to increase brightness.
2020-12-19

Yamaha Feeder of Our Company

As more and more unconventional materials adopt the tape packaging process, the problem of high throwing rate becomes more and more prominent. As a latecomer, the KHJ-MC200-003 Yamaha YS 12mm/16mm Feeder replaced the electric feeder and made great optimizations on the existing feeder structure in the market, greatly reducing the throwing rate and making the operation more convenient. At present, it can be applied to imported brand models such as FUJI, YAMAHA, SAMSUNG, JUKI, PANASONIC, etc. It vibrates calmly, works reliably with a long life-span; its stimulating vibrancy power can be adjusted, while the flux can be changed and controlled, it is convenient and stable to adjust; Vibrating feeder's vibrating electrical engine is stimulating vibrancy fountain, with low noise, low cost of electricity, and good adjusting capability, without rushing phenomenon. Its structure is simple and works stably, and easy to adjust and install, and it is convenient to maintain and take care for its light weight and small size, and it can avoid powder and dust pollution when using the closed structural body. Our main business includes: SMT Machine, Printer Machine, Smt Cleaning Machine, PCB Separator and Mounting Pick Machine, if there is any need, please contact us.
2020-12-05

Why Do Companies Use PCB Separator?

High-intensity use of the machine will cause a lot of consumption of the machine, so various problems are likely to occur when working. It is very important for the factory to extend the service life of machinery and equipment. The automatic separator equipment can achieve continuous production with low failure rate, short production preparation time and high production efficiency. With the development of the market, SMT and PCBA assembly have basically realized automated PCB splitting machines instead of manual splitting, so why do companies use PCB Separator machines? 1. The PCB Separator is usually mainly used in PCBA processing plants. Its purpose is to better replace traditional manual folding, improve production efficiency and ensure product quality. 2. When using the separator, the staff must put the PCB separator slot on the fixed knife holder, and place the PCB separator in a horizontal position to move. Do not wear too loose clothes when operating the machine. Hair must be tied up to prevent accidents. 3. During the time when the separator is off, the staff should pay attention to the maintenance work, pay attention to the protection of the upper and lower knife positioning plates and their upper and lower knife edges anytime and anywhere. Remove the surface of the machine and internal debris, and check anytime and anywhere the tightening of the machine screws. If the machine does not work for a long time, you should also remove the upper and lower positioning plates and the upper and lower cutters to protect them with oil, and wipe them off before use. In addition, before using the machine, check whether the wiring is damaged or not. 4. Daily inspection and maintenance must be done in normal times. It depends on whether the blade is loose to avoid accidents in the operation process. If the PCB separator finds an abnormality and needs repair, first make sure tha
2020-12-01

Our products are on show in Korea exhibition

Our products are on show in Korea exhibition Shenzhen ROC Precision Intelligent Technology Co., Ltd. was established in 2013 and is located at No. 3, Tengfeng Road, Fenghuang Community, Fuyong Street, Baoan District, Shenzhen. Focus on electronic manufacturing cleaning equipment and SMT peripheral equipment services, SMT welding equipment,SMT accessories and nozzle feeder and other consumables. Business Scope: 1.R & D and sales of intelligent automation equipment and components 2.R & D and sales of mechanical equipment and products, electronic products, electronic product cleaning equipment, PCBA sub-board equipment, electronic placement equipment, wave soldering equipment, reflow furnace equipment, SMT peripheral equipment and accessories, CNC numerical control equipment 3.Sales of water-based environmentally friendly cleaning fluids.

Industry Information

Analysis of the market status of the global and Chinese gas industry in 2021, the gas demand structure is continuously optimized.
Analysis of the market status of the global and Chinese gas industry in 2021, the gas demand structure is continuously optimized. 1.Industrial gas industry chain The upstream Raw Material of the...
SMT Production Line Placement Machine Excellent Combination Scheme
Nowadays, the industry is developing more and more rapidly, and new products are constantly changing with each passing day. In our daily industrial production, various machines with complex...
JUKI smt ejector used for KE200 AND KE2000 series machine
LED display manufacturers SMT placement machine shop process LED display manufacturers SMT placement machine shop process I recently went to Zhongshan Guzhen and Siu Lam, where the world's most...
SMT online automatic labeling machine common faults and treatment methods
The labeling machine is one of the core equipments in the SMT production line. It has the characteristics of high speed, high precision, flexibility, intelligence, etc. With the rapid development of...

Home > Company News