PSA Pressure Swing Adsorption Nitrogen Generator Installation Requirements
1. A large enough site should be selected according to the actual size of the nitrogen generator. The distance between the machine and the surrounding environment should be kept more than 1 meter for the convenience of operation.
2. The installation site must have good ventilation and less dust. 3. Cannot be installed in a corrosive environment. 4. The muffler (the exhaust gas outlet of the PSA Nitrogen Generator) can be installed indoors or outdoors. When the air compressor and the nitrogen generator are in the same room, the muffler should be installed outdoors to avoid affecting the nitrogen production. 5. The nitrogen generator should be placed in a place with poor ventilation, and the muffler should be installed outdoors. 6. If the muffler is installed outdoors, the muffler installed outdoors should be equipped with rainproof facilities. Pay attention to the height of the muffler not higher than the exhaust gas outlet. Otherwise, the sewage from the pipeline will not only be unable to be discharged, but it will easily cause the sewage to be poured back. 7. Notes on power supply installation: - The power supply should be configured according to the calibrated voltage (V), current (A) and number of phases.
- The grid voltage should be within the range of AC ±10%.
- The installation of the nitrogen generator must be carried out in accordance with the relevant national regulations and requirements.
